Is your Canon G3270 printer acting up? Printing blank pages, missing colors, or delivering streaky, faded prints? Before you toss it out or spend money on a replacement, try this: a deep Canon G3270 print head cleaning. It’s easier than you think—and it just might save your printer (and your wallet).

In this guide, I’ll show you step-by-step how to clean your Canon printer print heads using an affordable cleaning kit and some simple tools. We’ll fix those clogged nozzles and get your color and black ink flowing like new again.

Common Symptoms of a Clogged Print Head

Wondering if this is what your printer needs? Here are the telltale signs:

• Your Canon G3270 is printing blank pages
• Colors are missing or streaky
• Nozzle check report shows broken lines or faded sections
• You’ve tried replacing ink, but nothing’s working

If any of that sounds familiar, a deep clean is your next move.

What You’ll Need to Clean Canon Print Heads

You only need a few tools—and they’re inexpensive:

• A Canon printer head cleaning kit (includes syringe & tubing)
  This is the one I personally use – works great »
• Cleaning fluid (usually included in the kit)
• A small plastic container (for soaking heads)
• Lint-free cloth & isopropyl alcohol
• Optional: Canon-compatible ink refill
  Here’s a high-quality, budget-friendly option »

Step-by-Step: How to Fix a Canon Printer That Prints Blank Pages

Step 1: Print a Nozzle Check Report

Start with a nozzle check to see where the problem is:

1. On the Canon G3270, go to Settings > Maintenance
2. Select “Print Nozzle Check Pattern”
3. Review the results:
   • Blank = totally clogged
   • Broken lines = partial clog

This report tells you exactly which color(s) are having trouble.

Step 2: Move the Print Head Carriage

To access the print heads:

1. In the maintenance menu, select “Head Replacement”
2. The print carriage will slide to the center
3. Note: You’re not replacing the heads—just preparing them for cleaning

Step 3: Remove the Print Heads

Lift the top of your Canon printer and remove the affected print head(s).

• For color print heads:
  • Top Nozzle: Magenta
  • Bottom Left: Cyan
  • Bottom Right: Yellow
• If black ink isn’t printing, remove the black print head too

Step 4: Deep Clean the Print Heads

1. Fill your syringe with cleaning solution
2. Attach the silicone tubing to the nozzle
3. Gently push 20ml of fluid through the head
4. If it’s clogged tight, try warming the fluid slightly
5. Repeat for each color that’s not printing correctly

Pro tip: Always clean all nozzles while you’re in there. It’ll save future headaches.

Step 5: Let the Print Heads Dry (This Is Crucial)

• Set the cleaned heads in a clean, dry container
• Wait 24 hours to let them fully dry before reinstalling

Skipping this step can cause more clogging or damage the head.

Step 6: Refill Your Canon Ink Tanks

Before powering up again, make sure your ink tanks are full. Low ink can cause weak flow or further clogs.

I use this Canon-compatible refill ink—it works great and saves cash:
Canon Ink Refill Kit on Amazon »

Step 7: Reinstall and Restart the Printer

Put the dried print heads back into the printer and power on your Canon G3270.

Step 8: Run Printer Maintenance

You’ll now need to prime the ink system:

1. Go to the Maintenance Menu
2. Select “Replace Ink in Print Head” (wait about 6 minutes)
3. Then run a “Deep Cleaning”

This pulls fresh ink through your newly cleaned nozzles.

Step 9: Print a Final Nozzle Check

Print a nozzle report one more time.

• If all lines and colors are solid, you’re good to go
• If not, repeat deep cleaning one more time

Tip: Sometimes it takes 2–3 deep cleanings to fully restore flow, especially if it’s been clogged for a while.

You’re Done — Canon G3270 Printing Like New Again

That’s it—you’ve just fixed your Canon printer that was printing blank pages, skipped an expensive repair, and extended the life of your machine.

To recap, here’s what I recommend keeping on hand for regular Canon printer maintenance:

• Print Head Cleaning Kit (my go-to)
• Canon-Compatible Refill Ink (saves money)

Have Questions?

Drop a comment below or share your experience—I’d love to hear if this guide helped you.

Want more printer repair tips, DIY fixes, and Canon hacks? Bookmark the blog and stay tuned for more.